Worker Details

Name:
G Choppy

Alias:
gc

Description:
I cut wood. I curve wood. I shape wood. Three frames to raise my sword, then the cut. One quarter second. A piece is either cut or not. I can fly when needed.

Photos

History

I curved the top portion of Triple Splitter Small Feeder Outer Guider.
Started curving Candy Mama's bamboo for The Third Arch
Halfway done curving the bamboo for The Third Arch
Cut Second Bridge Supports. Reversible Guy held it for me
I cut Caret Splitter Feeder Extension Reflection Lower Left Protection to length. Archived for later.
I cut Caret Splitter Feeder Extension Reflection Lower Right Protection to length. Stored for later.
I cut the bars to make Caret Splitter Feeder Extension Reflection Protection and Caret Splitter Feeder Guider.
I need to cut Caret Splitter Feeder Extension Reflection Stanchion to size. Backpack Jack is holding it for me.
I cut Caret Splitter Feeder Extension Reflection Stanchion.
I cut Caret Splitter Feeder Lefter Guider.
I cut Caret Splitter Right Hand Inner Side from the top of the Ninth Placed Outer Spiral Support.
I cut toothpicks into the right shape for Caret Splitter Right Hand Side Inner Guider.
I shaped toothpicks to make Caret Splitter Right Hand Side Outer Guider.
I cut a notch into the upper support of Lower Zig Zag 2F.
I cut Two Ends Chopped Off Triple Splitter from the ends of the Triple Splitter.
I am ready to curve Triple Splitter Small Feeder Inner Guider.
I began curving Triple Splitter Small Feeder Inner Guider.
10:63-105 I cut Caret Splitter Inner Wall
10:106-117 I chop stick for Second Placed Outer Spiral Support.
10:155-165 I cut Third Placed Outer Spiral Support
10:164-178 Created Fourth Placed Outer Spiral Support.
10:183-194 I created Fifth Placed Outer Spiral Support
10:205-217 I trimmed Sixth Placed Outer Spiral Support
10:255-265 I cut Seventh Placed Outer Spiral Support
10:295-305 I cut the Triple Splitter Small Feeder Y Holder
10:317-347 Reversible Guy held Ninth Placed Outer Spiral Support for me.
10:342-351 I cut Eighth Placed Outer Spiral Support to the correct height.
10:1336-1354 G Choppy trimmed Ninth Placed Outer Spiral Support to create Tenth Placed Outer Spiral Support
11:181-231 I fixed Lower Zig Zag 2f Support for Pinky
11:617-781 I helped Candy Mama curve The Third Arch.
11:839-878 I cut Fourteenth Placed Outer Spiral Support
11:878-892 I cut Fifteenth Placed Outer Spiral Support
11:1323-1420 I removed misplaced support
11:1458-1585 Pinky held Triple Splitter Small Feeder Lower Outer Guider for me
11:1574-1586 I go to Reversible Guy to trim Nineteenth Placed Outer Spiral Support
11:1585-1597 Reversible Guy held Second Lane Second Level Second Bridge Second Support for me.
11:1599-1642 I adjusted the Lower Zig Zag Net Navigator for Pinky
11:1643-1658 I started making Zog Rail Ribs
11:1659-1672 I created [part:zog-rail-ribs-1]
11:1673-1678 I shaped Zog Rail Rib 2
11:1679-1699 I curved Zog Rail Rib 3
11:1700-1727 I curved Zog Rail Rib 4